Communicate with Supplier? Supplier
Sara Ms. Sara
What can I do for you?
Chat Now Contact Supplier

La Ya Aluminium products Co.,Ltd.

Aluminum Sheet Plate - manufacturer, factory, supplier from China

(Total 24 Products for Aluminum Sheet Plate)

  • Aluminium precision milled plate 5052

    Aluminium precision milled plate 5052

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 5052 Precision Milled Plate Features large specification high purity fine grain size low internal stress high dimensional and form stability high dimensional accuracy good flatness low surface roughness etc Aluminium precision milled plate 5052 Typical Applications Manufacturing device of semi conductor...

    Contact Now

  • Aluminium Annealed plate 5083 O

    Aluminium Annealed plate 5083 O

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 5083 O Aluminium Annealed Plate have higher strength than 5052 plate and has exceptional thermal conductivity In the tempered condition it retains good formability due to excellent ductility It is highly suitable for welding and can be hardened by cold work Because 5083 O Aluminium Rolled Plate exhibits...

    Contact Now

  • Aluminium Annealed plate 7075 O

    Aluminium Annealed plate 7075 O

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 7075 O Aluminium Annealed Plate have been and remain the baseline standard with a good balance of properties required for aerospace applications Aluminium Mill 7075 O is among the highest strength alloys available and used in highly stressed parts Corrosion resistance and machinability are rated as fair though...

    Contact Now

  • Aluminium Annealed plate 5086 O

    Aluminium Annealed plate 5086 O

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 5086 O Aluminium Annealed Plate have even higher strength than 5052 or 5083 and its mechanical properties vary significantly with hardening and temperature It is not strengthened by heat treatment instead it becomes stronger due to strain hardening or cold working of the material This alloy can be readily welded...

    Contact Now

  • Aluminium stretching plate 6061 T651

    Aluminium stretching plate 6061 T651

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 6061 T651 Aluminium Stretching Plate is one of the most versatile of the heat treatable alloys Commonly used for flooring ramps and stiars Aluminium Mill 6061 T651 is popular for its medium to high strength requirements good toughness and excellent corrosion resistance EN AW 6061 Aluminium Rolled Plate...

    Contact Now

  • Aluminium stretching plate 7050 T651

    Aluminium stretching plate 7050 T651

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 7050 T651 Aluminium Stretching Plate is a top choice for use in aerospace applications which requiresthe use of metals that have a great combination of resistance to SCC stress corrosion cracking strength and toughness It is commonly used for plate applications that are between three and six inches thick...

    Contact Now

  • Aluminium Annealed plate 5052 O

    Aluminium Annealed plate 5052 O

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    Aluminium Annealed plate 5052 O have good workability high fatigue strength and good weldability It has very good corrosion resistance especially in marine environments Aluminium Mill 5052 O can be anodized to improve the corrosion resistance of the material in corrosive environments Aluminium Rolled Plate is a type...

    Contact Now

  • Aluminium stretching plate 2024 T351

    Aluminium stretching plate 2024 T351

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    Aluminium stretching plate 2024 T351is used in a variety of applications such as fuselage structurals wing tension members shear webs and ribs and structural areas where stiffness fatigue performance and good strength are required Here at Howard Precision Metals we see most of 2024 T351 Aluminium Rolled Plate are...

    Contact Now

  • Aluminium quenching plate 7075

    Aluminium quenching plate 7075

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    Aluminium quenching plate 7075 have very good maching properties its hard surface good for etching and polishing it applied in the fields of precision grinding tools electronic housing telecommunication equipment and computer enclosure EN AW 7075 Aluminium rolled plate Application blowing foaming moulds high deep...

    Contact Now

  • Aluminium stretching plate 6082 T651

    Aluminium stretching plate 6082 T651

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    Aluminium Mill 6082 T651 is a medium strength alloy with excellent corrosion resistance It has the highest strength of the 6000 series alloys Alloy 6082 is known as a structural alloy In plate form 6082 T651 Aluminium Rolled Plate is most commonly used for machining As a relatively new alloy the higher strength of...

    Contact Now

  • Aluminium Annealed plate 2024

    Aluminium Annealed plate 2024

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 2024 Aluminium Annealed Plate are considered the aircraft alloy because of its strength It is readily formed in the annealed condition and may be subsequently heat treated 2024 Aluminium Rolled Plate possess good machinability and can be machined to a high finish Since corrosion resistance is relatively low 2024...

    Contact Now

  • Aluminium stretching plate 7075 T651

    Aluminium stretching plate 7075 T651

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 7075 Aluminium Rolled Plate with alloy which is one of the highest strength aluminum alloys made for the industrial and consumer markets Although other 7000 alloys have since been developed EN AW 7075 Aluminium Rolled Plate remains the baseline with a good balance of properties required for aerospace...

    Contact Now

  • Aluminium Annealed plate 6061 O

    Aluminium Annealed plate 6061 O

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    Alloy 6061 Aluminium Rolled Plates are the plate which with most versatile of the heat treatable aluminum alloys Though less strong than most of the 2xxx and 7xxx alloys 6061 Aluminium Rolled Plate provides an extensive range of mechanical properties and corrosion resistance and can be fabricated by many of the...

    Contact Now

  • Aluminium quenching plate 2024

    Aluminium quenching plate 2024

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 2024 Aluminium Rolled Plate are perhaps the best known and most widely used aircraft alloy Since it exhibits high yield strength and relatively good fatigue resistance it is readily used on structures and parts where good strength to weight ratio is desired Because of its good machinability and superior grain...

    Contact Now

  • Aluminium Annealed plate 3003 O

    Aluminium Annealed plate 3003 O

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    3003 O Aluminium Rolled Plate is approximately 20 stronger than 1100 series aluminum plate Aluminium Rolled Plate 3003 O reacts well to mechanical finishings as well as organic finishes 3003 O Aluminium Rolled Plate welding is readily accomplished by means of conventional welding methods but may be gummy if machined...

    Contact Now

  • 2024 Aluminium rolled plate

    2024 Aluminium rolled plate

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    2024 Aluminium rolled plate with aluminum alloy of 2024 is the typical hard aluminum alloy in the Al Cr Mg system Many countries produce this alloy the largest amount of hard aluminum The characteristics of the alloy are high strength heat resistance to a certain extent can be used as the working parts under 150 When...

    Contact Now

  • 6082 T651 Aluminium Plate

    6082 T651 Aluminium Plate

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    6082 Aluminium Plate belong to 6 series aluminum alloy Al Mg Si 6082 Aluminium Plate it is the aluminum alloy plate which can be heat treatment with moderate intensity and good welding performance corrosion resistance mainly used for transportation and construction engineering industry Application

    Contact Now

  • Aluminium quenching sheet 2024

    Aluminium quenching sheet 2024

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    Alloy 2024 was introduced by Alcoa in 1931 as an alclad sheet in the T3 temper It was the first Al Cu Mg alloy to have a yield strength approaching 50 000 psi and generally replaced 2017 T4 Duralumin as the predominant 2XXX series aircraft alloy With its relatively good fatigue resistance especially in thick plate...

    Contact Now

  • Aluminium hot rolling sheet 2024

    Aluminium hot rolling sheet 2024

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 2024 Aluminium hot rolling sheet belongs to the high strength heat treatment can be improved after quenching and tempering condition plastic medium spot welding welding is good you have the tendency of intergranular crack formation with gas welding alloy after quenching and cold work hardening its cutting...

    Contact Now

  • Aluminium Quenching sheet 6082

    Aluminium Quenching sheet 6082

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    EN AW 6082 Aluminium sheet is a medium strength alloy with High resistance to corrosion It has excellent joining characteristics and Good acceptance of applied coatings Because of theCombines relatively high strength so Aluminium Quenching sheet 6082 as a relatively new alloy the higher strength of 6082 has seen it...

    Contact Now

  • Aluminium Plate for Marine

    Aluminium Plate for Marine

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    Due to the low density high strength high rigidity aluminum and corrosion resistance ship design aluminum ships than steel or other material the weight of a cent Especially for boat material and high speed hull materials General requirements to ensure under conditions of sufficient strength and rigidity to minimize...

    Contact Now

  • Aluminium tread plate 5754 H114

    Aluminium tread plate 5754 H114

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    5754 H114 Aluminium tread plate is a low maintenance and durable material for various construction and structural purposes Aluminium tread plate 5754 H114 is available in a wide selection of sizes and thicknesses Some of its uses include industry and vehicle flooring When buying aluminium tread plate pay attention to...

    Contact Now

  • 7075 Aluminium plate for aerospace

    7075 Aluminium plate for aerospace

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    7075 Aluminium Hot Rolled Coil is a cold treatment forging alloy the strength is higher than soft steel 7075 is one of the most powerful alloys for commercial use General corrosion resistance good mechanical properties and anodic reaction The fine grain makes the deep drilling performance better the tool wear...

    Contact Now

  • Aluminum Diamond Plate 3003-H22

    Aluminum Diamond Plate 3003-H22

    • Min. Order: 1 Ton

    • Place of Origin: China

    • Transportation: Ocean,Air

    3003 H22 Aluminum Diamond Plate The brilliant shine of Aluminum Diamond Plate adds sparkle along with durability AKA Aluminum Diamond Plate Aluminum Tread Plate Tread Bright Aluminum Floor Plate this highly reflective economical product is widely used in decorative cosmetic and architectural applications Having good...

    Contact Now

Review

Kirstie Lucas

Oct 28, 2019 5

Great Good Aluminum Sheet Plate .Thanks manufacturer!
Michie Sim

Oct 13, 2019 5

Good Aluminum Sheet Plate ! Hope the manufacturer keep on!
Mr.peters

Oct 13, 2019 4

Came quickly, packaged very well, thank you very much the seller for efficiency, I recommend!
We always believe that one's character decides products' quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for Aluminum Sheet Plate , aluminum sheet plate , aluminium sheet plate , remember to make contact with us at any time!
That has a sound small business credit, great after-sales service and modern production facilities, we've earned an outstanding standing amid our buyers across the earth for Aluminum Sheet Plate , aluminum sheet plate , aluminium sheet plate , The company has numbers of foreign trade platforms which are Alibaba, Global Sources, Global Market, Made-in-china. Our products sell very well in Europe America Middle East and other regions more than 30 countries.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

Sara

Ms. Sara

Email:

layametal1@163.com

Send Inquiry

Tel:86-021-6688732

Fax:

Mobile Phone:+8613431787786

Email:layametal1@163.com

Address:No.618 Shengfu Road ,Songjiang District , Shanghai, Shanghai

Mobile Site

http://www.layametal.com